INTSUPERMAI Glue Free Stretch Screen Frame Screen Frame Mesh Silk Screen Printing Mesh Stretching Frame 16x20 Inch Self-Tension Frame Stretch Frame Tool

It is made of high-quality steel plate and aluminum profile, Advanced electrostatic spraying treatment of steel plate surfacecorrosion-resistant. scrub resistant. rust free and deformation free:lt can be repeatedly stretched and printed hundreds of times, so as to achieve the effect of one frame to one hundred frames Install the mesh 1,Loosen the four screws and align the inner edge of the aluminum pressure slot with the inner edge of the frame. 2,Use aluminum alloy pressure mesh bar to wire mesh buckle into one side of the aluminum tank, straighten the mesh as far as possible, in the opposite side , wire mesh buckle into the aluminum tank; Then buckle mesh into the other two sides. 3 First use the hand electric drill to alternately turn the four screws. tighten the mesh 4,If the tension is not enough, use the reinforced inner hexagon wrench to continue to tighten the tension. 5,Installation of mesh or plate is completed, mesh can be plate-making, plate can be printed. Special tips: installation of the plate, because the force is not uniform, may cause a slight deformation of the pattern; If you need to correct, you can paste the original film or 1:1 printed copy on the plate, and then align the screen pattern with the original copy by fine-tuning the four-side screw of the screen frame. 6,Before printing, the foamed rubber strip can be inserted between themesh and the frame. the edge can be sealed with tape Take off the mesh 1,Evenly loosen the four side screws of the mesh frame 2,Using the open cover handle to insert the horizontal edge of the aluminum alloy batten. Lift the handle to open the batten easily. 3,Remove the mesh and save Item included: Screen Printing Stretched Screen Frame Glue Free Self-tension Frame (006073)

• This is a screen frame that can stretch screen mesh without any other tools or equipment. Max tension can be up to 20N. It only takes you 5 mins to stretch the mesh. Much shorter than traditional mesh stretching process.It is also a glue free frame that make you stretch mesh without using any kind of glue or adhesive. Much more safe and environmental friendly.
• The mesh can be disassembled and used repeatedly. After printing, rinse the screen plate clean, remove the mesh from the screen plate and save it. When the pattern needs to be used again.the screen plate can be installed on the screen frame again for use. (note that the four sides of the mesh shall be 3-5 cm larger than the outer size of the frame)
• There is no plate-making ability need to process the screen plate, user can directly process the mesh.and does not need the screen frame (completely solve the problem of screen plate damaged in the transportation process , packaging cost is high), and then the mesh can be directly installed in the screen frame to print.
• This frame can be used repeatedly, wearing parts are mainly screws, nuts and rubber strips in the buckle slot, the machine is equipped with 6 pieces spare screws and nuts .1 meter rubber strip.In order to prevent the screws and nuts from rusting, all the screws in this frame are made of 304 stainless steel.
• It is made of high-quality steel plate and aluminum profile, Advanced electrostatic spraying treatment of steel plate surfacecorrosion-resistant, scrub resistant, rust free and deformation free:lt can be repeatedly stretched and printed hundreds of times. so as to achieve the effect of one frame to one hundred frames